Stainless Steel Material Grades
Select the stainless steel grade according to ambient humidity, coastal exposure, and project environment.
SS201
Cost-effective stainless steel for dry interior spaces such as indoor office partitions, dry corridor doors, and budget-conscious residential projects.
SS304
All-around architectural stainless steel offering reliable corrosion resistance for daily bathroom humidity, commercial storefronts, and interior/sheltered entrances.
SS316
Molybdenum-alloyed stainless steel engineered for coastal buildings, high-humidity spas, poolside enclosures, and high-salt-spray outdoor environments.
| Material Grade | Environment | Corrosion Resistance | Typical Applications |
|---|---|---|---|
| SS201 | Dry Indoor | Basic (Economical) | Interior office doors, dry residential partitions |
| SS304 | Indoor / Bathroom / Sheltered Exterior | High (Commercial Standard) | Shower doors, commercial storefronts, main entrances |
| SS316 | Coastal / High-Humidity / Outdoor | Maximum (Salt-Spray Resistant) | Coastal properties, pool areas, exposed exterior doors |
Back-to-Back Mounting & Door Thickness Fit
Every back-to-back pull handle pair ships with protective isolation hardware to prevent metal-to-glass contact and ensure rigid clamping across glass, wood, and metal doors.
8–12 mm Tempered Glass Doors
- Glass Drilling Hole: Ø12 mm or Ø14 mm depending on the specific model's post/bolt diameter (always verify CTC and hole diameter on the model spec page before tempering).
- Anti-Slip Silicone Washers: Installed on both interior and exterior faces of the glass to cushion clamping pressure and prevent handle rotation.
- Anti-Friction Nylon Protective Sleeves: Inserted directly through the drilled glass bore so the stainless steel through-bolt never touches the glass edge.
35–55 mm Wood & Metal-Framed Doors
- Extended Through-Bolt Screws: Optional long-shank M8/M10 through-bolts supplied on request to accommodate 35–55 mm solid timber, composite, or aluminum/steel-framed doors.
- Flush Alignment: Washers seat cleanly against finished timber or powder-coated metal stiles without crushing hollow profiles.
- Order Note: Simply specify your door thickness (e.g., 45 mm timber door) when submitting your RFQ so we pack the matching screw length.
Back-to-Back Installation Overview (4 Steps)
Zero Metal-to-Glass ContactConfirm center-to-center (CTC) spacing and Ø12 / Ø14 mm hole diameter prior to glass tempering or timber drilling.
Insert the nylon protective sleeve into the glass bore and place anti-slip silicone washers on both sides of the door.
Pass the threaded through-bolts from the exterior handle through the nylon sleeves and secure the interior mounting nuts.
Slide the interior handle onto the mounting standoffs and tighten the concealed hex grub screws evenly.
Recommended Models by Project Type
Match tube diameter, handle geometry, and stainless steel grade to your project environment.
Frameless Shower Enclosures
Ideal for H-Type, U-Type, and L-Type pulls (available in compact shower sizes and towel-bar L configurations). Built in SS304 or SS316 with silicone gaskets for daily wet-area durability.
Commercial Storefronts & Offices
Heavy-duty back-to-back round and square tube pulls (such as Ø32 mm tube models like HZJ-122) engineered for 8–12 mm tempered glass entrance doors in retail, offices, and public buildings.
Residential & Hotel Entrances
Long-span stainless steel entrance pulls for timber pivot doors and metal-framed entryways, configurable with extended screws for 35–55 mm door thickness.
Ready to specify models or request custom door hardware?
Browse our verified product catalog or send your door thickness, CTC spacing, and target finish directly to our factory team.